Washer huller 3m – L38

This washer huller is the fastest shell and most versatile of our washers.
It is designed to remove the green skin from the walnuts (husk) and wash them very quickly.
Equipped with a motorized inner drum rotating in the opposite direction of the outer drum, it can, thanks to the variation of speed and the nature of the coating, act forcefully or smoothly continuously.
Its solid chassis and components allow an intensive use. It is easy to maintain and the spare parts are easily available.
The control is carried out by varying the filling ratio and the speed of rotation. Driving requires some experience.

SKU: 1996 Categories: , ,


The benefits
Speed : removal of waste and bad walnuts
Less labour : sorting requires less people
Efficiency in waste sorting : with deflectors and transversal and return conveyors options
Adaptation to different locations: extensions legs, continuous operation with two machines
Economy and respect of the environment : reduced water consumption through dirty (recycled)/clean waterways

– Opened green walnuts to finish hulling
– Clayey soil which causes earth infiltration in the walnuts interstice
– Closed green walnuts for sale as fresh nuts (capacity: 500 kg of fresh hulled walnuts/hour)

– Special brushes on hulling rotor for earthy nuts on clayey ground
Instead of the punctured metal for fragile walnuts ( Parisiennes, Chandleur,…)
– Motorized Door
Enables the control of the filling level
– Speed variator on drum
Optimizes washing for difficult production
– Dirty Water (recycled) / clean water ramps
Enables a better management of the used water. Economy thanks to the recycling of pre-washed water (last rinse of walnuts with clean water (city water). According to the specifications of the PDO walnuts of Grenoble and walnuts of Périgord.
– High pressure ramp
Enables a better cleaning thanks to the high pressure provided. (for earthy or first shaken walnuts)
– Lateral and central deflectors
– Transverse carpets and cover
Enables the management of the liquid and solid waste that are grouped separately in one point.
– Extension Legs
Enables a tailored adaptation according to each installation

Performance Raw walnuts : 6-7 m3/h – Washed walnuts : 5,3 m3/h
Fresh walnuts : 4 t/h – Dry walnuts : 2 t/h
Motorization 2,2kW + 3kW – 380v
Transmission External Rotor by 2 coaxial gearmotors with belt
Internal Rotor by 1 coaxial gearmotor with belt
Water / Watering Recommended water flow : 5m3/h
2 Low pressure water ramps inside and outside
Driving position The control is carried out by varying the filling rate and the speed of rotation
of the inner drum by means of a speed variator.
Reverse rotor direction possible.
Outer drum Ø 800mm mechanic-welded, laser/square 12/12
Inner drum Disc brush in and out brush output, drum metal punctured
Unstuck brush With helical turns
Fonctionnement Continuous
Options Brush Drum – Motorized Door – High pressure ramp out
Speed variator on the drum – Side and central Deflectors
Hulling water re-injection pump – Washing water recycling Bin
Security Comply with EC standards
Length : 3,80m – Width : 1,08m – Height : 1,62 m – Weight : 1 540 kg



Constructor of solutions for harvesting and working fruit